Double-walled clear glass for sublimation & snowglobe
 
This bundle includes a lid and PLASTIC straw for each cup.
Manufacturer recommended settings:
Heat press settings
Heating temperature: 350
Time: 50 seconds
Oven settings
Heat temperature: 356
Time: 3 mins
Please note these are the recommended setting but will vary based on your heat press/ oven

Disclaimer:
Do not seal the hole or pour in anything before sublimating
Please avoid extreme heat after sealed
Do not leave in a hot car in the summer after sealed
Do not heat it in any way after it is sealed.
It is suitable for drinking cold and warm water, not hot water.  We suggest not higher than 140 degrees F.
 
Craft Steps:
Sublimation:
We recommend using an oven at 356 degrees F for 6 minutes.
If using a tumbler heat press do not use heavy pressure. Normal pressure is best. We recommend 356 degrees F for 60 seconds.
Snowglobe process:
Pour glitter and mixture through the pre-drilled hole at the bottom after the design has been sublimated on the tumbler.
Seal the hole with UV resin (follow your manufacturer recommendations for cure temp and time).
 
Lid instructions
Do not let soak
Let lids dry after soap wash to avoid mold